|

(Ships
FREE to 48 States)
|
AC50A
Leakage Current Clamp
Multimeter
AM-AC50A
$349.95
$319.95 |
|
|
Amprobe
AC50A
Leakage Current Clamp
Multimeter
Current clamp Multimeter with
leakage current capability.
Current clamp multimeter for measuring
low AC current in the microamps.
Great for applications requiring measurement of leakage
and fault currents.
-
AC current measurement to 60A
-
Leakage current measurement with resolution of 0.01mA
-
AC voltage to 400V
-
Resistance measurement and continuity beeper
-
Min/Max control to see largest or smallest values in a
series of measurements
-
Relative value measurement to determine differentials
-
Data Hold to freeze measurement value on the display
-
Digital display with Analog bargraph
-
Jaw opening 30 mm (1.2 in)
-
Auto-Power-Off to save battery life
Minimum Resolution 0.01mA
|
 |
|
Included accessories: Batteries, carrying case,
test leads, users manual |
Specifications:
|
Size: |
|
183 x 63,6 x 35,6 mm ( 7.2 x 2.5 x 1.4 inch) |
|
Weight: |
|
190 g (7 oz) |
|
Display: |
|
3-3/4, LCD incl. functions and symbols |
|
Bargraph: |
|
40 segments |
|
Range Selection: |
|
manual |
|
Auto-Power-Off: |
|
approx. 30 min. |
|
Overload display: |
|
the left digit is blinking |
|
Measuring rate: |
|
20 measurements/sec. (Bargraph), 2
measurements/sec. (LCD) |
|
Clamp opening: |
|
ca. 30 mm (1.2”) |
|
Overvoltage Category: |
|
CAT II, 600 V, CAT III, 300 V |
|
Pollution degree: |
|
2 |
|
Height above MSL.: |
|
up to 2000 m, indoor operation |
|
Battery display: |
|
at low battery |
|
Power supply: |
|
Battery 2 x 1,5 V IEC LR6 (alkaline) |
|
Current Consumtion: |
|
approx. 10 mA |
|
Operation temperature: |
|
-10° C … 50° C (14° F... 122° F) |
|
Storage temperature: |
|
-20° C … 60° C (-4° F... 140° F) |
|
Humidity: |
|
< 75 % relative humidity |
Optional Accessories:
|
Orders over $200.00 ship
FREE
to 48 states |
|
ELS2A
AC Line
Splitter
LE-AM-ELS2A
$20.95 |
|
|
Amprobe
ELS2A AC Line Splitter
- Measures current without splitting AC line cords
- Two
measurement loops for increased sensitivity, X1 and
X10
- Built-in voltage measurement points to check for
voltage sags and surges
- Rated for 120V, 15Amps
|
more Clamp-On Multimeters
|