LicensedElectrician.com Home Page
LicensedElectrician.com Online Supply - Books, Videos and Tools for the Electrical and Construction Trades
 

Storefront

Order Form

        

Amprobe ACD-10 PLUS / ACD-10 TRMS-PLUS
600A Digital Clamp-on Multimeter
(2 models available)
 

ACD-10 PLUS Clamp-on Multimeter
 AM-ACD-10PLUS
 $89.95

Amprobe
ACD-10 PLUS / ACD-10 TRMS-PLUS
 
 
600A Digital Clamp-on Multimeters w/ Unique Thin Jaws

Amprobe’s ACD-10 PLUS meters offer thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 1 inch.

Both meters also measure Capacitance and Frequency.

Frequency is measured by either jaws or test leads - Very versatile clamp Multimeters.!

True RMS version (ACD-10 TRMS-PLUS) for noisy measurement environments for a more accurate reading.

  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin Jaws, only 10mm (0.4”) thick
  • Resistance to 40MΩ
  • Continuity Buzzer
  • Capacitance to 3000 uF
  • Frequency measurement
  • In rush current
  • Hold & Maximum reading functions
  • Accommodates conductors up to 26mm (1.02”) in diameter
  • Auto ranging
  • Auto power off
  • Rubber over-molded case
  • Overload protected
  • TRMS Measurement (ACD-10 TRMS-PLUS)
  • Included Accessories: Test leads, battery installed, soft carrying pouch, and users manual

Specifications:

Size:   190 x 63 x 32 mm (7.4 x 2.5 x 1.3 in
Weight:   139 gm approx
Safety:   Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed. CAT III-600 Volts ac & dc; Pollution degree : 2
Display:     3-3/4 digits 4000 counts LCD display
Update Rate:     3 per second nominal
Polarity:     Automatic
Operating Temperature:     °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude:     Operating below 2000m; Indoor use
Storage Temperature:     -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient:     nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery:     Below approx. 2.4V
Power Supply:     3V coin battery IEC-CR2032
Power Consumption:     2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing:     Idle for 30 minutes
APO Consumption:     5 μA typical
Jaw opening & Conductor diameter:     max 26 mm (Approx 1 inch)
Special Features:     30ms Max Hold; Data Hold; Relative Zero mode

Optional Accessories:
Orders over $200.00 ship FREE to 48 states

ELS2A
AC Line Splitter
 LE-AM-ELS2A
 $13.95
Amprobe ELS2A AC Line SplitterMeasures current without splitting AC line cords, Two measurement loops for increased sensitivity, X1 and X10
  • Measures current without splitting AC line cords
  • Two measurement loops for increased sensitivity, X1 and X10
  • Built-in voltage measurement points to check for voltage sags and surges
  • Rated for 120V, 15Amps

more Clamp-On Multimeters


Order Online Order online: Add the item(s) to your shopping cart andSecure Server submit your order online through an encrypted secure server. Major Credit Cards and PayPal are accepted.

Mail your Order Order offline: Print an offline order form and Mail or Fax your order to us.

Contact us:  Webmaster@LicensedElectrician.com

Official PayPal Seal
 

VisaMastercardAmerican ExpressDiscoverPayPal
Policy/Contact info