Ultra Scale Master Pro

NEW! - Affordable Area Takeoff Tool and Digitizer System

For residential and light construction contractors.

• Measure and calculate areas, lengths and volumes for all types of polygons
• Fast and easy-to-use
• Affordable, portable and powerful
• Works with or without a PC

The Ultra Scale Master® Pro is an affordable and portable area takeoff and digitizing system.

Unlike expensive digitizers, the Ultra Scale Master® Pro allows you to measure plans at your office or on the job site without the need for additional computing devices or software.

The ergonomic design with large targeting window allows you to accurately measure and compute areas, segment lengths, perimeters, and volumes for simple or complex polygons, poly lines, irregular shapes, arcs and circles.

72 built-in architectural and engineering scales allow you to measure plans and drawing up to 24" x 36" in size. Four custom scales allow you to measure out of scale drawings.

The Ultra Scale Master® Pro can operate as a stand alone digital area takeoff tool, or you can connect it to your PC to transfer measurements into any estimating and spreadsheet program that accept text input from a number pad or keyboard. It also can send digitized (x, y) coordinates to takeoff software programs like our Smart Takeoff! graphic digitizing software.

Operating Modes:

• Stand Alone Operation
  Measure and display line lengths, areas, perimeters, volume, wall areas, arc lengths, radius and diameter without the use of a PC.
• PC Input Mode
  Send displayed values to your spreadsheets and estimating software programs via supplied USB cable (no special USB driver software needed).
• Digitizer (x, y) Coordinate Entry
  Send coordinates to graphic digitizing software like our Smart Takeoff! program.

Measuring Shapes:

• Simple or Complex Polygons
  Measure all polygon points and automatically find area, line lengths, perimeter and volume.
• Poly lines
  Measure two or more points and automatically get segment length, total length and wall area.
• Irregular Shapes
  Measure all points on the curved shape and automatically find area, perimeter and volume.
• Arcs
  Measuring the starting point, high point and finishing point of the arc and automatically get area, perimeter, arc length, volume, and wall area.
• Circles
  Select any three point on the circle and automatically get area, perimeter, volume, radius and diameter.

Additional Features:

• Ergonometric shaped measuring device and large targeting window gives you point-to-point measuring accuracy
• Easy to read LCD display
• 72 built-in scales or create custom scales for out-of-dimension drawing and plans
• Imperial or Metric Mode
• Change units of measure of any displayed value at any time
• Easily recall line lengths and computed measurements for current measured shape
• Enter a stored Height and get volume and wall area calculations
• Operates on 4 –AAA batteries (included) or from USB Cable when connected to PC
• Automatic Shut-Off saves battery life

Preference Settings:

• Display Total Measurements or last segment measured
• Beep sound control
• US/Euro value display
• PC Send Display after data is sent to the PC
• PC data terminating command settings allow you to control spreadsheet cell direction
• Set Right Hand or Left Hand Digitizer mode
• USB Send Delay control for slower computers

Includes:

• Measuring Device (Puck)
• Padded Leatherette Puck Case
• 4-AAA batteries
• Reflector Bars
• 10 ft. USB Cable
• Quick Setup Sheet
• Quick Reference Guide
• Fully Illustrated User’s Guide
• Durable Molded Carrying Case

Computer Interface:
       USB 1.1 and 2.0 compatible HID Mode via
       supplied 10 ft. (3.048 m) cable

Bar Specifications:

• Footprint
  25.63 x 37.63 x 1.40 inch (651 x 956 x 36 mm)
• Active Measurement Area
  24 x 36 inch (610 x 914 mm) (re-configurable)
• Weight
  2.31 Lbs (1049 grams)

Puck Specifications:

• Footprint:
  3.79 x 7.63 x 1.13 inch (98.4 x 193.6 x 28.5 mm)
• Weight:
  7 oz (200 grams)
• Power Source:
  USB power when connected to PC
  4 “AAA” batteries when used as stand alone device
• Range:
  Up to 36 inches
• Accuracy:
  ±0.040 inch (± 0.1016 cm)
• Operating Temperature:
  41 to 104°F (5 to 40°C)
• Storage Temperature:
  14 to 122°F (-20 to 60°C)
  Humidity Range:
  0 to 95%, non-condensing

Warranty:

• 1-year limited warranty