Single Range 50-600V AC Non-Contact Voltage Tester (NCVT)

The IDEAL 61-627 is CAT IV 600 V AC, UL Listed, Single Range Non-Contact Voltage Tester (NCVT) that automatically detects and indicates the presence of voltages within a range of 50 to 600V AC.

The tester provides non-contact detection of voltage through an antenna enclosed in plastic at the tip of the tester which senses the presence of the electromagnetic field present around live conductors.

The tip is illuminated by a Green LED when powered on and switches to a Red flashing LED, and audible beep that increase in frequency as the voltage level increases.

The tester is powered by two 1.5V AAA batteries and features an in tip LED flash light, an audible disable function, a lanyard tie-off point, an auto power off function and a low battery indication.

• UL Certified CAT IV 600V AC, 50 to 600 V AC
• Auto Power Off - After 10 minutes of inactivity (no button pressed and no signals detected), the tester will emit one long beep (~0.5s) and then shut off. Note: if the flashlight is on, it will also shut off.
• Low Battery Indication - If battery voltage is less than around 2.4V, the green led in the tip will flash 3 times and the buzzer will send out one long beep, then turn off the device.
• Always Test on Known Live Circuit before and after use.

Orders over $300 ship FREE to 48 States

3 Available 50-600V AC Non-Contact Voltage Tester ID-61-627 $10.66

California residents see Prop 65 WARNINGS

Ideal Non-Contact Voltage Testers (NCVT)s

>>  Work Gear for Electricians and the Trades

*  *  *  *  *  *  *