Wire Pulling Tools & Equipment

The 4REEL Bracket quickly mounts to 2 x 4 studs and can hold up to 700 lbs.

• Made for a maximum of 4 – 1000’ NMD reels or weight equivalent
• Max Weight: 700 lbs.
• Clip together for compact, easy storage
• Made from galvanized steel
• To be used on 2×4 wood studs only. Not meant for steel studs
• - more

Insert into conduits for safe and easy wire pulls!

• Reduces Time and Labor
• Reduces the chance of damaging wires
• Turns wire pulling into a one man job

Like having an extra pair of hands on the Job! -
Pays for itself the first time you use it!

• Protect wires from damage while pulling
• Fits 4" Square Boxes
• Can be used in all 4 Directions
• Flip it over to fit standard (shallow) or deep boxes
• Made of Strong, Impact-Resistant Plastic
• Easy on and off - more

• Flexible, Inflatable Airbags can be sized to fit a range of conduit sizes
• They can be blown or vacuumed into conduit with most shop vacs
• An inexpensive alternative to other line carriers
• Just 3 sizes fit 1/2” through 6” Trade Size Conduits - more

Finally, the Amazing Knuckle Saver from Rack-A-Tiers - Ever give a meter base a knuckle sandwich? Too bad it was your own. Next time, defend yourself with the Bend All.

Fits #3 to 350 MCM conductors. Machined from 6061 Aircraft Aluminum - Fits on a standard 1/2" ratchet. - more

The Big E-Z Wire Rack is the Ultra Compact and Collapsible Wheeled Wire Dispenser.

When You're ready to pull wire, assemble the Big E-Z using your Conduit Bender or a scrap piece of 1" pipe (not included) as an axle and you're ready to go.

The Big E-Z utilizes the same design and great features as the original E-Z Roll while allowing you to dispense larger wire spools.

Holds up to 32" Diameter Reels - 300 lb Load Tested - more

The easiest and safest way to route wire and cable

The Cable Chase Wire Support Brackets are designed to provide a straight, clean path for wires with no obstructions. The brackets allow you to greatly reduce friction and stress on wires being pulled through the holes due to the hole design.

Using the Cable Chase instead of drilling holes will greatly reduce the damage to floor joists, LVL’s and manufactured wood. - more info

The Cablestik® has been designed to accommodate most commonly used cables. It can be quickly attached directly to a domestic house frame for instant cable dispensing, or to a Free-Standing Cablestik or Hitch Mount

The compact CableStik Vehicle Mounting Kit (aka Hitch Mount) is designed to adapt the CableStik for mounting to a Tow Hitch, Bumper Bar, Tray Top, or other suitable (stable) surfaces. - more

The Clip Whacker is specifically designed to easily and safely install beam clamps/clips.

• Rare Earth Magnet holds the clip in place
• Fits multiple sizes of Beam Clamps/Clips
• No more flying clips or sore fingers!
• Saves Time and Money!
• Made in USA! - more

For Augering and Installing Wire or Pipe Under Sidewalks and Driveways

• Fish hole for easy retrieval of wire
• Custom heat treated drill bit designed for organic material
• Long taper for easy retrieval
• Interchangeable lengths
• Custom heat treated spring steel shank for optimum memory - more

Ergonomic carrier specially designed for the manual transportation of wire spools (electric wiring, steel cable, chain, etc.)

• Carry Wire Spools with one hand
• Just slip it in and Lift!
• Lift center handle to release.
• Weight capacity: 50Lbs. - more info

When you're ready to pull wire, wheel the E-Z ROLL into position and dispense wire directly from your pipe bender or 1" EMT.

The E-Z Roll is big enough to handle 1000' rolls of Romex., but small enough to fit in a Job Box.  Simple, Effective, Rigid Steel Construction and Light-weight Design. - more

Ferret Stick - Extension Attachment

If your job requires you to fish wire, or Inspect in closed or hard to reach places the Ferret WiFi Wireless Inspection Camera and Wire Pulling Tool is one of the best tool investment you will ever make!

• Wireless, Download Free App & Easily Connect to your SmartPhone/Device
• Connects to a Variety of Fish Sticks and Wire Pulling Rods (directly, or with included Adapters.)
• Rechargeable: Charging Time: 70 Minutes

more:

Fiberglass reinforced plastic fish tape with durable low-friction polyamide coating. Includes a light and durable steel frame with anti-corrosion surface treatment. Available in  3/16", 1/4" and 1/2" diameters and lengths from 200ft to 985ft.

• 3/16" diameter FiberSnake comes in a steel cage up to 300'
• 1/4" diameter FiberSnake comes in a steel cage, with lengths from 200' to 600'
• 1/2" diameter FiberSnake comes in a steel cage with wheels, in lengths of 657' and 985' - more

Easily Repair and Improve your 1/8" Fish Tape with the Fish Heads FishTape Repair (and Improvement) Kit!

Tired of getting a Fish Tape snagged or breaking? Ever think there's got to be a better way?

Give the Fish Heads FishTape Repair Kit a try! - more

EASILY FIX AND IMPROVE BROKEN FISH TAPE ENDS

The Flex Flyer features a quick change swivel head that installs on the end of a fish tape in 20 seconds by twisting the fish tape with 2 pairs of pliers.

The loop technology allows the leader to move smoothly through all types of conduit including flex.. - more

Thread a Flex Puller onto an MC Cable, hook to your string or fish tape and pull!

The EASY way to pull MC Cable!

• Easily screws onto exterior of 1/4" and 3/8" MC cable
• Provides a hook to pull MC cable through hollow and insulated walls and ceilings
• Can be used on #14, #12 and #10 MC Cable
• Package of 3  - more

The H2 Homer Helpers are intended to support multiple NM-B, MC and Low Voltage cables in electrical home runs. They will greatly reduce labor time and eliminate the use or need for staples.

• Quickly and easily supports multiple electrical cables.
• Holds up to 24 cables with one support.
• Greatly reduces labor time.  - more

The Jimbo – Wire Pull Bracket helps to eliminate cable snags and damage over sharp edges and ceiling grid.

• Set up multiple brackets making a temporary cable raceway to avoid catching or snags
• Consolidate cables to the best angle for ease of pulling
• Multiple ways to attach and configure to match the situation
• Pull hard around corners and through structural steel  - more

LaserLine Cable (Pull String) Installation Tool -

The Ultimate, Labor Saving, Installation Tool!

LaserLine will accurately install (shoot) a pull line up to 120ft. - through most web trusses, across suspended ceiling systems, over hard to move objects, under sub-flooring or in any limited access areas like those found in most offices and commercial building structures. - more

A ‘SHOE HORN’ FOR 2” LB’S

The LB Wire Guide puts the wire in the pipe & leaves the skin on your fingers.

• For PVC LB fittings & adaptable to most metal LB’s
• One man conductor installation
• Faster conductor installation
• Installs in two positions to fit both ‘Ends’ of the LB
• Helps prevent Conductor Damage - more

The Mag Daddy - Magnetic Cable Holders and Tie Mounts are ideal for strapping wire to metal areas. Available in a variety of types and sizes to best suit your needs.

Attach to: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc. - more

This new version has a much stronger magnet and a smoother rolling surface. - more

The Penguin Puller Sr. and Jr. are revolutionary new tools designed to aid in easily pulling in large cables.

The sleek, bullet shape allows for seamless pulling, no tape or crimps required. Utilizing four slots and allen-key set screws the Penguin Puller Sr. and Jr. are rated for 5,000 lbs. of pull strength.

• Penguin Puller Sr. - 3/0 to 350 MCM Copper or Aluminum
• Penguin Puller Jr. - 1/0 to 4/0 Copper or Aluminum - more

These non-conductive, light-weight fish tapes in cases are perfect for line or low voltage fishing. Available in two or three strand depending on the length of the Pull

• Available in 2 Strand (49.2 ft - 15m)
  or 3 Strand (98.4 ft - 30m) - more

Insert into conduits for safe and easy wire pulls!

• Reduces Time and Labor
• Reduces the chance of damaging wires
• Turns wire pulling into a one man job

Slim, but Strong Steel Roller fits in your Box for Smooth and controlled Wire Pulling

• Spring-Loaded Tips keep it locked in place
• Reusable

Versatile - Waterproof - Rustproof - Reliable - Rugged - Fast

No moving parts, won't rust, rot, scratch your trunk, bash the doorframe, and they float. Nice and compact, RACK-A-TIERS earn their place in your truck. (sold in pairs) - more

How many broken spools in your shop? A few? A bunch? There's gold in them thar rolls but how do you get at it? Fix them with the Reel End.

The Reel End fits plastic spools #10 through #18 gauge. A real money maker. "Who says you can't put those pieces back together?" - more

The Smart (and easy) way to pull Rope, FishTapes and more...

Stop wrapping Rope around hands and wrists... put away the pliers for pulling Fish Tapes - Just slip the Ropematic Pro over the Rope or Fish Tape and pull!

The Ropematic Pro locks down on the Rope or Fishtape as you pull towards you, and releases as you slide it forward for the next pull.

Stop hurting those hands and wrists... 

- can increase your pulling power dramatically!  -more

Time is money and when you think about it, a lot of time is spent stripping, taping and untaping wire for fishtape pulls.

Because SNATCH STRAPS can be daisy chained, you can easily drop wire groups at boxes along the pull. Brilliant!

• Fast Attachment for conduit pulls
• No stripping required
• No taping required - more

No Tools Required - Faster, Easier to Use!

• One Piece
• One Hand Installation
• Fits all standard Steel Studs and Punches
• Fire Rated V.O.
• Round Bushing - 1-3/8"
• Square Bushing contains 70% more cross sectional area for more cables and easier pulls! - more

The Stick installs quick and easily to any standard stud. Its compact design allows for easy storage once the job is complete.

Features:

• Weight capacity: 200Lbs.
• Maximum 15" reel width - more

This easy-to-hang wire dispenser allows fast, twist-free Romex, MC cable or flex pulling.

Most coil dispensers are too big, cumbersome and expensive. Not this one.

The Thomas Wheeler knocks down (folds down flat) and sets up in seconds, hangs on 2x4, in the trusses, above tee bar or on a ladder.

• Strong, lightweight, flexible extendable fiberglass rod kits
• Use to reach and pull wires over suspended ceilings, in cable trays or through interior walls
• Packaged in clear tubes for protection and long-term storage
• 3/16 in. pale green luminescent fiberglass - Glow-in-the-dark material for easy use in attics, basements and other dim lit areas
• 1/4 in. white fiberglass - Extra Stiffness for Added Control
• Accessory Kits available - more

Tug-Wise Reel Management System -

Finally a simple, safe and effective way to pull cable without the extra cost of jack stands or reel wagons which can be dangerous and require more than one person to operate.

Handle Reels up to 6000 lbs! With no heavy lifting required you can easily fasten the Tug-Wise unit to your reel, flip it on the ground and you're ready for the cable pull. Eliminate extra costs for labor and expensive reel stands. - more

The Wire-Pod is a compact, portable dispenser designed specifically for coils. This handy device will work with NMSC (NM), AC, and Flex coils.

• Opens for use and folds away for easy storage
• Compatible with NMSC (NM), AC and Flex coils
• Weighs less than 3 LBS.
• Made in the USA

All coil dispensers dispense but this one REWINDS wire as well.

Over-runs can be wound back, old wire salvaged and re-installed. And it's fast.

No hanging or mounting, the WIRE TUB just sits on the floor. Handles Flex, Romex, MC, etc. Same tough plastic as RACK-A-TIERS. Awesome!

• 360° feed adjusts automatically
• 3-way adjustable centre hub
• Removable top plate has handle for rewinding wire
• Big 24" diameter capacity - more

Like having an extra pair of hands on the Job! -
Pays for itself the first time you use it!

• Protect wires from damage while pulling
• Fits 4" Square Boxes
• Can be used in all 4 Directions
• Flip it over to fit standard (shallow) or deep boxes
• Made of Strong, Impact-Resistant Plastic
• Easy on and off - more

>> Tools for Electricians <<

HVAC Tools

*****************************************************************