Breaker ID
Pro
Circuit Finder
Kit
The Breaker ID Pro
Circuit Breaker Finder Kit is the most
complete circuit-finding tool kit available.
A
complete circuit- finding tool kit for locating circuit breakers in
residential, commercial, and industrial environments.
(previously known as CF12
Pro Kit.)
We took our
popular Breaker ID Circuit Breaker Finder and upgraded it to meet
your professional needs. Use the Breaker ID Pro Kit to find circuit
breakers in residential, commercial, and industrial environments.
It calibrates automatically so all you need to
do is connect the transmitter to the circuit and scan the breaker
box with the included receiver.
On the first scan, the tool
calibrates to the circuit breakers, and on the second scan, it takes
what it learned and indicates the target. (During the first scan,
the CF Breaker ID Pro may indicate more than one breaker as it
memorizes each circuit.)
A green LED light and audio signal will
identify the correct breaker so you won't need to haphazardly guess
and cut power to essential gear like computers, servers, and
appliances that shouldn't be turned off.
The Breaker ID Pro Kit comes packaged in a
lockable case and includes clips and blades for easy access to most
outlets, including 230 and 240 volt industrial. The kit also
contains light socket and 120 V AC plug adapters for use with
finished circuits.
- Scan for easy identification and labeling
of all breakers
- Finds breakers faster and more
efficiently without trial-and-error work or accidental shutoffs
- Isolate circuits for repair or
replacement, or work on specific circuits without interrupting
others
- Blades allow easy access to most outlets,
including industrial 230 and 240 volt
- Automatic sensitivity adjustment — no
knobs or dials
- One-light simple-green LED indicates
proper breaker
Note: In a 3-phase application, one lead of
the transmitter must be connected to the neutral line and
the other lead to one of the three power lines. Do not exceed 277 V
AC.
(This tool was previously known as the CF12
Pro Kit.) |