StudSensor
i65
OneStep
Electronic Stud Finder & Wall Scanner by Zircon
CenterVision®
technology finds the center of studs in just OneStep™
StudSensor™ i65
finds wood and metal studs and joists up to 1-1/2 inches deep
beneath the surface of walls, ceilings, and floors, in one simple
step.
The easy-to-read LCD display indicates direction, edge, and center
of stud, and the signal strength indicator helps distinguish between
shallow and deep targets.
AC WireWarning® continuously detects hot AC wiring
up to 3 inches deep for safety.
When the StudSensor i65 finds the center of the stud, it beeps and
the SpotLite® Pointing System shines a beam of
light over the center.StudSensor™ i65,
part of Zircon's OneStep™ family of intelligent wall scanners, finds
the center of studs in OneStep!
Designed for carpenters, remodelers, and
do-it-yourselfers who don't have time for guesswork. Use to find
wood and metal studs while continuously scanning for hot AC.
With an easy-to-read LCD display, finding
studs has never been so easy!
Features:
- Zircon-exclusive
CenterVision™ technologyfinds the center of studs
in OneStep
- Auto
Recalibration continuously recalibrates and points in the
direction of the nearest stud
- Exclusive AC
WireWarning™ continuously detects hot AC
- Exclusive SpotLite®
Pointing System illuminates exact location of stud
- Finds both wood and
metal studs
- LCD display
indicates direction, edge, and center of studs
Applications:
- Hang heavy cabinets,
pictures, mirrors, and shelves securely
- Install ceiling
fans, grab bars, and chandeliers
- Install drapery rods
and closet organizers
- Install outlets,
dimmer switches, and cable lines
Specifications:
Dimensions |
6.21 in. H x 3.04 in. W x
1.35 in. D |
Weight |
6
oz with battery |
Battery Type |
9-V alkaline (included) |
Position Accuracy |
Stud Scan mode:
Up to 3⁄4 inch depth
Center: 1⁄8 inch typical
Edge: 3⁄16 inch typical
At 1 inch depth
Center: 1⁄4 inch typical
Center-finding capability: up to 1-1⁄2 inches typical |
Depth |
Stud: Typically up to 1-1⁄2
in. (38 mm)
NOTE: Sensing depth and edge detection can
vary due to moisture content of materials, wall texture, and
paint |
AC Position accuracy |
Typically 90–250 V at 50–60
Hz within 6 in. (152 mm) of a hot unshielded wire |
AC Depth |
In typical drywall with
Romex™ wiring, wire
can be detected up to 2 in. (50 mm) deep
NOTE: Sensing depth and edge detection can
vary due to moisture content of materials, wall texture, and
paint. |
Operating temperature |
40° to 120°F (4° to 49°C) |
Storage temperature |
20° to 150°F (-7° to 66°C) |
Humidity |
80% RH (noncondensing) |
Water resistance |
Splash resistant, not
waterproof |
|